Automatic Pneumatic Demolder
Dupre Solutions table-top Pushbutton Demolder presses out up to 140 cavities at a time. Can demold up to 300 gummies/candies a minute. Built in safety with two button safety controls requires two hands to operate the machine – Can be used with multiple mold shapes and formats. Works with cavity back silicone molds. Requires clean compressed air and 120V ac single phase power. Designed for injected cavity back molds. Standard configuration is 10 by 10.
Features
- Space Saving design
- All contact parts made from 304 SS
- Demolder latches in position –
- Multiple molds can operate on same machine
- Up to 140 ejection pins
- Safety – requires 2 hand operation
- Change parts for custom molds available
- Stroke and press depth easily adjustable
- Pres speed adjustable
- Wide bottom pins available
- Pins are removeable and changeable for different molds and products
- Indicator light
- Power Switch
- Flow Controls
- Optional Alignment pins for precise positioning of mold
- Leveling feet
- High discharge optional
- Integration with sugaring table
- Two Heavy Duty Air Cylinders
Technical Specs
|
Demolding Frequency |
Up to 500 candies a minute |
|
Mold size |
Max Mold 380mm x 360mm |
|
Capacity per hour |
180 molds |
|
Max Pins |
140 |
|
Power |
120 V Single Phase 60 Hz |
|
Air |
90 PSI @ 5 CFM |
|
Material |
SSS304 |
|
Standard Mold Size |
360mmx360mm |
|
Standard # Pin |
100 |
|
Standard Ejector spacing |
35mm |
